SAVE TIME
Reduce the hours spent hand-cutting repetitive ridge profiles.
Designed for compatibility with Trimdek, Trimclad, Monoclad and 5-Rib profiles using a 30mm or 37mm turndown on your flashing, the Trimdek Notcher self-centres over the rib to produce fast, repeatable ridge-cap cuts.
Position it. Pull the lever. Move to the next rib.
No measuring every cut.
No marking.
No relying on someone's ability with reds and greens.
Entalladora para remate de cumbrera Trimdek
Cortadora de cumbreras (también conocida como cortadora de remates de techo o perforadora de cumbreras)
El máximo ahorro de tiempo
Nuestros entalladores para techos están diseñados para revolucionar la industria de la techumbre.
Ideales para perfiles Trimdek, Trimclad, Monoclad y de 5 nervaduras, estas innovadoras herramientas reducen considerablemente el tiempo necesario para entallar las cumbreras.
- Mayor eficiencia: Trabaje hasta 3 veces más rápido que con unas tijeras para hojalata estándar*
- Construcción duradera: Cuentan con cuchillas reemplazables y un mango con recubrimiento en polvo para un rendimiento prolongado
- Cortes precisos: El diseño que se adapta a las nervaduras se posiciona automáticamente sobre el perfil, por lo que no es necesario medir ni marcar: simplemente colóquelo y corte.
- Fabricado con orgullo en Australia: Diseñado y fabricado al 100 % en Warrnambool
Ahorre horas y mejore su productividad con esta herramienta esencial para techos.
Tenemos dos variantes disponibles de nuestro entallador Trimdek, adecuadas para diferentes longitudes de doblez de su tapajuntas. ¿No encuentra la longitud que necesita? Llame a Nathan al +61437624880 para analizar las opciones
Quantity
GET THE SAME CUT
The tool follows the roof profile to help produce a repeatable result across the entire run.
FREE UP YOUR EXPERIENCED CREW
Once the correct tool is matched to the correct profile, repetitive cutting becomes simple enough for less-experienced team members to handle.
12 MONTH WARRANTY
Every EERA Notcher comes with a 12-month warranty.
SEE IT DO THE JOB
The profile-specific body locates over the correct rib and centres itself before making the cut.
That means your finished result isn't dependent on manually measuring each notch or how good the person holding the snips is.
Position. Cut. Repeat.
MAKE SURE YOU'RE ORDERING THE RIGHT ONE
EERA manufactures two Trimdek Ridge Cap Notchers.
30MM OR 37MM
This tool is designed for a 28/29mm rib height.
The 30 and 37mm is relevant to the length of the turn down on your flashing that needs to be scribed. Same roof sheets different way of doing a flashing.
Names such as Trimdek, Trimclad, Monoclad and 5-Rib can vary between manufacturers, so don't rely on the name alone
Product Specifications
Materials & Care
Made in Warrnambool. Backed for 12 months.
Each EERA Notcher is handmade and assembled by our team in Warrnambool, Victoria.
The hardened-steel blades can be sharpened or replaced when required.
Customers can replace blades themselves, although EERA recommends returning the tool to our workshop so our team can replace and set them correctly.
12-month warranty included.
Shipping
Most current orders leave our workshop within one business day.
Because every EERA Notcher is handmade and assembled by our team, please allow up to five business days for processing during busy periods.
Standard delivery: generally 5–10 business days
Express delivery: generally 1–3 business days
Need it for an upcoming job?
Contact EERA and we'll confirm current availability.
STILL NOT SURE IT'S THE RIGHT ONE?
Don't guess.
Use the EERA Profile Finder or send us your profile details and we'll help you identify the correct Notcher before you order.
